Recumbent main page Search Produktwegweiser Contact
HP Velotechnik Logo des Herstellers von Liegerad, Dreirad und trikes Hier liegen Sie richtig! (auf einem Liegerad oder Liegedreirad von HP Velotechnik)
blauer Balken

Navbar

Products
Vehicles
Grasshopper fx
Streetmachine Gte
Speedmachine
Gekko fx 20
Gekko fx 26
Gekko fxs
Gekko US edition
Scorpion
Scorpion fx
Scorpion fs 20
Scorpion fs 26
Scorpion fs 26 Enduro
Scorpion fs 26 - S-Pedelec
Scorpion plus 20
Scorpion plus 26

Accessories
Comfort and ability accessories
Streamer
AirZound Horn
Moonbiker
Apparel

Technology
E-Drives
Recumbent seats

Shopping Service About us Contact

Configurator:
Custom configurator

Quick search:

Follow us:
Facebook YouTube Google+

Caution, this bike is no longer available: The Street Machine Gt recumbent with steel frame and rigid seat has been replaced by the Street Machine Gte. These pages are only online for archive purposes.

Speedbag rear fairing

Speedbag Tour Do you want to carry your commuting luggage comfortably and on the same time even improove your bike's aerodynamics? Then the Speedbag is the ideal accessory to mount for you. It serves both as a comfortable trunk and a aerodynamic rear fairing. As it is moulded from glass-fibre-reinforced plastic it is very light, weighing only 2,5 - 3 kgs. A lock protects the contents of your Speedbag against thieves.

The opening of the Speedbag is a triangular shape with 33 cm base lenght and 36 cm height.

The Speedbag comes in orange, making your bike highly visible in traffic.

The shape of the Speedbag is precisely fitted to the design of our seat and the necessary room for suspension travel. To install the Speedbag, you connect it to the seat and the frame with screws. This is why you can not adjust the Street Machine Gt's seat angle so easily anymore with the Speedbag. The maximum load allowance is 10 kgs. We recommend to use our lowrider-carrier with panniers together with the Speedbag for heavy touring.

Street Machine Classic with Streamer and Speedbag We ship the Speedbag as a kit for self-assembly. We recommend to cover the surface between seat and Speedbag with double sided self adhesive tape to avoid any unwanted noise due to small moovements. You then secure the Speedbag by drilling 6-8 holes close to the edge of the seat and connect the two parts with screws. Make sure to use screws with large heads and equivalent washers. An aditional link to the frame at the struts originally intended for the rear carrier provides extra stiffnes. The Speedbag can be used as an alternative to our rear carrier.

Copyright © 1993-2017 HP Velotechnik OHG (Conditions of use)
Last changed: May 20, 2012